Site menu:
RSS News
LCD7SDIx12 - Dual 7" TFT LED Monitor
with 12 SDI inputs / audio embedded and audio meters
(click on photo to enlarge)
The monitor LCD7SDIx12 - Dual 7 "TFT is mounted on an adjustable rotating 3 unit 19" rack container,
has 12 SDI video inputs, each of which has 8 pairs of audio stereo channels embedded.The display is LED backlighting for better picture quality, longer life and lower power consumption.
Each display can show a stereo VU-meter vertical bars to monitor the audio level of input channel selected.
Each display can show one of the 12-channel SDI input by selecting it via his keyboard while the audiostereo pair can be chosen by one of the on-screen menu (OSD).
The buttons on the right of each monitor: MENU, UP, DOWN, ENTER allow to enter the various menus and make selections and adjustments.
Is it possible to save the settings on internal memory, reloading or resetting all to factory defaults values.
The OSD menu allows you to select and adjust: brightness, contrast, backlight, saturation, CH AUDIO, VU METER (ON / OFF), SAVE, LOAD, RESET.
In the middle between the 2 displays there is a button to select the audio to listen through the front (left or right monitor) and the potentiometer for adjusting the volume.
On the left side of LCD7SDIx12 there is a stereo jack for headphone listening.
In the front panel to each monitor there is a two-colors (green and red) LED TALLY for report the situation Preview or ON-AIR, its command is sent from the video mixer 9-pin D connector TALLY IN, located on the rear panel.
On the back of the monitor are also the 12 BNC connectors for SDI inputs and connector for the power supply which can range from 8 to 12 volts.
The universal power supply 110-220 Vac is provided with the monitor.
(click on photo to enlarge)
Features
-
Broadcast and professional use
-
Display: 7 " LCD TFT
-
Resolution: 800 × 480 pixels
- Contrast Ratio: 500
- Brightness: 300 CD/m2
-
Response Time: 10 ms (at 25°C)
- Video Standard: PAL
-
Active area: 152,4 x 91,44 (mm)
-
Dot Pitch: 0.0635 x 0.01905 (mm)
- LED Life: 20.000 hours
- Surface Treatment: anti-reflective
-
Connectors: 12 SDI inputs on BNC 75 ohms
- Tally inputs: 9-pin D connector.
- Tally LED: red and green bi-color for reporting on each monitor preview or on air state.
- Power: 8-12 volts (12 volt power supply included)
-
Current consumption: 1.5 A
- Assembly: 3 RU 19 " container with side brackets for rotation.
-
Dimensions: (W x H x D) 440 x 125 x 38 mm, without lateral wings
- Weight: 1.5 Kg
In accordance with constant improvement policy of products, El.Man (Elettronica Mangione) reserves the right to modify without notice and at any time, features and prices of its own apparatus.